01
Specification Confirmation
Material & Formula Confirmation
Confirm friction material requirements, backing plates, shims, sensors, clips, and other application-specific components.
JCMSTECH supplies new aftermarket brake pads for global auto parts importers, wholesalers, and regional distributors, with OE and application matching, friction material and accessory confirmation, 100% final inspection, private label packaging, and mixed-model export support.
Many wholesalers can source common brake pads, but still face repeat-order problems when friction performance, fitment, accessory configuration, and batch consistency are not properly controlled.
Add fast-moving brake pad references to your current brake system product line.
Get stable model coverage, inspection support, and repeat-order supply.
Supply common front and rear brake pad applications for local repair and replacement demand.
Develop your own brake pad brand with packaging,, product materials, and supply support.
JCMSTECH supports brake pad supply for different vehicle applications, braking requirements, and regional market preferences. Send your OE number, FMSI/WVA reference, vehicle information, or sample photo for model and formulation confirmation.
Available for applications and markets that prioritize lower dust, quieter operation, and stable daily-use performance.
Suitable for broad aftermarket applications requiring balanced braking response, heat handling, and wear resistance.
Available for markets that prioritize stronger initial bite and braking performance under frequent-stop conditions.
OE-matched brake pad sets with shims, wear sensors, clips, or related hardware where required by the application.
Brake pad performance depends on more than the friction block alone. Fitment accuracy, material selection, shims, hardware, surface protection, and packaging can all affect noise, dust, wear, installation, and repeat-order confidence.
The formulation is confirmed according to the vehicle application, market preference, and required braking characteristics.
Controlled dimensions help reduce caliper interference, installation difficulty, and fitment-related returns.
Application-matched shims help control vibration transfer and reduce brake squeal complaints.
Suitable chamfer and slot configurations can support bedding, gas release, noise control, and stable contact.
Correct sensors, clips, and accessories help reduce missing-part and installation complaints.
Surface and packaging protection help reduce corrosion, scratches, label damage, and warehouse errors.
Send your OE number, FMSI/WVA reference, vehicle information, sample photo, or purchase list. JCMSTECH helps confirm the brake pad shape, axle position, friction material, shim, wear sensor, hardware configuration, quantity, and quotation before order confirmation.
| Field | Example / Note |
|---|---|
| OE / Ref No. | OE number or supplier reference number |
| FMSI / WVA Reference | Confirm by catalogue, sample, or cross-reference where available |
| Vehicle Application | Make / model / year / engine |
| Axle Position | Front / rear / left-right set where applicable |
| Pad Shape & Dimensions | Length / width / thickness / backing plate profile |
| Friction Material | Ceramic / semi-metallic / low-metallic / confirm by requirement |
| Accessory Configuration | Shim / wear sensor / clips / hardware / grease where applicable |
| Order Information | Quantity / destination market / packaging requirement |
Can’t confirm the exact reference? Send your sample photo, OE list, FMSI/WVA number, or vehicle information. Our team will help check the correct brake pad application.
Each production stage is coordinated according to the confirmed brake pad application, friction material, accessory configuration, and order requirements to support stable repeat-order quality.
01
Specification Confirmation
Confirm friction material requirements, backing plates, shims, sensors, clips, and other application-specific components.
02
Material Preparation
Control friction material preparation and pre-forming according to the confirmed production specification.
03
Bonding Control
Manage pressing, curing, and thermal processes to support stable bonding and repeat-order consistency.
04
Dimension Control
Control finished thickness, surface flatness, chamfers, slots, and brake pad shape according to the confirmed reference.
05
Configuration Completion
Install shims, wear sensors, clips, and approved product markings according to the confirmed brake pad configuration.
06
Shipment Readiness
Check appearance, dimensions, product identification, accessory completeness, and protective packaging before shipment.
Every order receives final inspection for visible condition, reference identification, accessory completeness, and packing. Laboratory or batch testing may include friction performance, shear strength, wear, thermal fade and recovery, and noise evaluation according to the model and order requirements.
Evaluates braking friction characteristics under defined test conditions.
Evaluates bonding strength between the friction material and backing plate.
Checks wear behavior and service consistency under specified test conditions.
Evaluates braking performance after heat exposure and recovery.
Supports control of squeal, vibration, and NVH-related complaints.
Export Experience
Cooperation Records
Car Models
Test Project
JCMSTECH supports long-term brake pad sourcing for importers, wholesalers, and regional distributors who need reference matching, mixed-model coordination, private label packaging, and reliable repeat-order follow-up.
Send us your OE number, sample, or purchase list. Our team will confirm the application, provide a quotation, arrange production, and support packaging, shipping, and after-sales service. Ready to check models and pricing? Contact JCMSTECH for a drive shaft quotation.
JCMSTECH works with selected manufacturing and supply resources to support brake pad model confirmation, production follow-up, inspection, private label packing, and export shipment coordination.
JCM offers product sales of Brake Pads. We have 15 years of export experience in automotive parts. More than 200 global customers choose JCM.
JCMSTECH supports brand customisation, whether it is auto parts customisation or outer packaging customisation. Simply choose to work with JCM and we can meet your customisation requirements from order to delivery in one stop.
JCMSTECH has been cooperating with many famous warehousing companies for a long time. Customised flexible warehousing solutions according to your needs.
Always worried that you don’t have promotable images and videos for your products? Choose to work with JCMSTECH. You can get promotional product images and videos for free, without paying for additional design fees.
Yes. Send the OE number, FMSI/WVA reference, vehicle make, model, year, engine, axle position, sample photo, or purchase list. JCMSTECH will help confirm the correct brake pad shape, configuration, and quotation.
JCMSTECH can support brake pads for passenger cars, SUVs, and light commercial vehicles. Available formulations may include ceramic, semi-metallic, and low-metallic options according to the confirmed application and market requirements.
JCMSTECH supplies new aftermarket brake pads only. We do not supply remanufactured brake pads.
MOQ and lead time depend on the brake pad reference, stock availability, formulation, accessory configuration, packaging requirements, model mix, and total order quantity. The final terms are confirmed with the quotation.
Yes. Mixed-reference orders can be coordinated according to model availability, carton quantities, packaging requirements, total order volume, and shipment plan.
